使用期限*
许可形式单机和网络版
原产地加拿大
介质下载
适用平台windows
2021年2月PSCAD V5正式发布,这是自X4版本之后大的一次版本更新,本次更新了大量的功能,修复了大量的bugs。同时还发布了PRSIM电力数据格式转换软件,PowerFactory或PSSE格式的数据,通过PRSIM轻松转换成适用于PSCAD软件的格式。
我们在以下领域的HVDC方面提供**服务:
● 高压直流输电规划与可行性研究
● 操作,维护和调试服务
● 为LCC和VSC包括现代模块化多电平换流器
(MMC)提供仿真模型
● 交直流系统相互作用
● 交互作用
● 滤波器设计
● 接地较设计
![pscad授权码](//l.b2b168.com/2021/04/29/15/202104291512459995324.jpg)
DSDYN and DSOUT Subroutines
The DSDYN and DSOUT subroutines provide accessibility for control and monitoring of system variables on either side of the electric network. This offers a great advantage in programming flexibility, as it enables both the control of input variables and the monitoring of output variables, all within the same time step. This is an important concept, especially in the design of control systems involving feedback: Judicial selection of code placement can help avoid time delays that are uncharacteristic to the real system being modeled.
When it pertains to source code insertion into the system dynamics, there is no difference between DSDYN and DSOUT, besides their sequence in the solution process. However, there are specific uses for each, and certain code may be more optimally utilized when it is placed in one, rather than the other. For example, DSOUT is primarily used to define output variables directly following the electric network solution. Of course, DSDYN could be used for this purpose as well, but the same output variables would be delayed, due to the time step increment between DSOUT and DSDYN (see Figure 2-1). Likewise, variables controlling electric devices (i.e. network input variables) are best defined in DSDYN, as then updates will occur in the same time step before the network solution.
![pscad授权码](//l.b2b168.com/2021/04/29/15/202104291554387168624.jpg)
通信结构(ComFab):应用程序间,通信控制体系结构。支持三种类型的通信接口:传统的TCP/IP(默认)、共享内存和直接网络连接(即InfiniBand上的RDMA)。
并行多次运行(PMR):并行执行多重运行。
EMTDC二进制输出文件格式:EMTDC输出文件的格式和处理方式已经彻底改变。所有EMTDC输出文件都保存在一个二进制文件中。这样有很多好处,包括**快速和的数据处理,尤其是在处理大量输出时。
![pscad授权码](//l.b2b168.com/2021/04/29/15/202104291551197659644.jpg)
输电线路和电缆滑动故障:使用新的串联线路功能执行滑动故障研究。
元件快速启动/禁用:单击即可禁用/启用元件。所有的V5项目现在都有一个固有的禁用层。
元件分组:将单个元件的组合成一个组,然后可以作为单个对象移动、复制、粘贴、镜像、翻转或旋转。
北京天演融智软件有限公司专注,专心是科学软件网的服务宗旨,开发的软件、传递*的技术、提供贴心的服务是我们用实际行动践行的**目标,我们会为此目标而不懈努力。
http://turntech8843.b2b168.com